基于數學模擬的污水處理廠設計：方法與案例
魏忠慶1,2，胡志榮3，4 *，上官海東2，葉均磊2，邱勇5
（1.同濟大學污染控制與資源化研究國家重點實驗室，上海 200092；2.福州城建設計研究院有限公司，福建福州市，350001；3.浙江工商大學環境科學與工程學院，管理工程與電子商務學院, 浙江杭州，3100124；4.加拿大GL環境科技有限公司，加拿大安大略省哈密爾頓市；5.清華大學環境學院，北京，100084）
摘要：隨著我國城鎮污水處理廠的出水標準逐步提高，基于經驗的傳統（定性或半定量）設計方法已經難以滿足穩定達標和高標準水質排放的要求。本文提出了基于數學模擬的污水處理工藝設計中的工藝評估和優化方法，并列舉了兩個在新建污水處理廠和污水處理廠提標改造中數學模擬應用的案例，包括工藝方案的比較選擇、工藝方案評估優化等內容。
關鍵詞：數學模擬；GPS-X；設計方法與案例；污水處理廠
中圖分類號：X703
Model-Based Design of Wastewater Treatment Plants: Methodology and Case Studies
Zhongqing Wei1,2,ZhirongHu3, 4*, H Shangguan2, JunleiYe2, YongQiu5
1.State-key Laboratory of Pollution Control and Resources Reuse, Tongji University, Shanghai, 200092, China;
2.Fuzhou CityConstruction Design & Research Institute Co. Ltd, Fuzhou, Fujian 350001, China;
3.School of Environmental Science & Engineering；School of ManagementEngineering&E-Business, ZhejiangGongshang University, Hangzhou, Zhejiang 310012, China;
4.GL Environmental Inc, Hamilton City, Ontario Province, Canada;
5.Environmental Simulation and Pollution Control Joint State-key Laboratory, School of Environment, TsinghuaUniversity, Beijing, 100084, China
* Corresponding author: zhironghu@yahoo.com
Abstract:With a large number of municipal wastewater treatment plants (WWTPs) put into operation and more stringent effluent standards applied in China, the traditional, experience based process design methods are difficult to meet the challenge for such requirement of robust operation and high effluent quality. In this paper, the model based process design procedure was presented, and two practical cases are introduecedto demonstrate the application of the model based design method, including process comparison/selection, and process evaluation/optimization.
Key Words:Mathematical modeling; GPS-X;Design methodology and case studies; Wastewater treatment plant
